RACK for R+P or Track
$114.40
Comes in 4′ section.
Description
Engages with pinion gear to move the mill horizontally along R+P or down the track.
Track rack CAN be used on rack and pinion, but you will need to add a 1/8″ spacer behind so it properly engages the pinion gear.
(improper engagement causes wearing – pointy rack is bad rack)
Installation instructions: https://youtu.be/l1Zl8K4Zs5I
Additional information
| Location |
Track ,Rack and Pinion |
|---|
Related products
4220 – Lumber Gauge Chain
$25.00
