Installation Instructions

1.) Disconnect battery

2.) Attach hour meter and mounting bracket to the instrument panel. Use the two pre-drilled holes at the top of the instrument panel. (Note: Attach the short black wire to the right hand mounting screw.)

3.) Hold the hour meter in position and tighten all mounting screws.

4.) Remove key swith from instrument panel and attach the long red wire to the “IGN” terminal. (Same terminal as green wire to alternator warning light.)

5.) Reinstall key switch and connect the long black wire to the plus (+) terminal on the hour meter.

6.) Connect the short black wire to the remaining terminal on the hour meter.

OPERATION CHECK-OUT

1.) Connect battery.

2.) Turn key switch on and pull stop button out.

3.) The indicator at the far right side of the hour meter should move slowly. The hour meter should make a “tickig” sound.