If your mill didn’t come with endstands to begin with, these parts (above) plus a set of endstands will get you off the “board and block” and fairlead methods.

This parts package above specifically controls the side to side action setting the width of the cut. (Endstands control the up and down action setting the depth of the cut.)

NOTE ABOUT TRACK SHOES… track shoes are the part that holds the track to the board (of board and block).
If you do not have track shoes, you will need a set of them > https://mobiledimensionsaw.com/product/rp-track-shoe/

IF YOU DO HAVE TRACK SHOES… they likely do not have the R+P attachment bracket. This is a part that is attached at a specific location at a specific angle… it it recommended that you send your track shoes to us for us to install that R+P attachment bracket using our fixtures. The cost for that is $125 shop time plus return shipping.