

Complete Bearing Kit – Hydrostatic
From $1,117.40
All the bearings for a hydrostatic mill (1985-2017) – NO HOUSINGS
Does not include engine bearings.
If your top saw collar is pre or post 1994, that makes a difference for which bearing you need.
The serial number of your mill will tell you the year. #YY# (## meaning the order it came off the line. ie: 0029 is the 9th mill of 2002)

150 in stock (can be backordered)
Part is on its way
This kit does not include housings whenever possible. Some bearings need to be pressed in/out while some spin in/out.
Main Shaft – Illustration 2
2, 4301
Edger Shaft (HEX) – Illustration 3
1, 4381
1, 4325/4310 – NOTE: this bearing depends on when the collar it fits on was made!
1, 4304
Edger Shaft Stabilizer – Illustration 3
2, 4324-O
1, 4312
Lower Feedworks – Illustration 5
4, 4311
2, 2100
1, 4313
1, 4314
Upper Feedworks – Illustration 6
2, 4313
Hydrostatic Feed Slide – Illustration 7
2, 4324-P
1, 4312
Neutral Lift – Illustration 9
1, 4312
Edger Belt Rollers – Illustration 12
1, 2189
1, 2196
Weight | 9.8 lbs |
---|---|
Dimensions | 9 × 11 × 6 in |